Mobile Weighbridges & Low Profile Axle Weighers (LPAX)
Built to Order. Engineered to Last.
When project logistics demand instantaneous setup, zero permanent civil foundations, and total freedom to relocate your weighing station at a moment's notice, Dynamic Works introduces the Low Profile Axle Weigher (LPAX) under our flagship "EXELON" series.
Engineered specifically for capturing total dynamic gross vehicle weights via rapid axle group measurement, the 30-Tonne LPAX mobile weighing system bridges the gap between bulky full-length weighbridges and slow, portable wheel pads. It provides field operations with an accurate, highly relocatable weighing station ready for service in a matter of hours.
LPAX Quick Metrics
- Axle Capacity: 30 Tonnes per Axle Group
- Profile Height: Ultra-Low 65mm
- Track Dimensions: Dual 3.6m Tracks
- Tare Weight: ~1.25 Tonnes per Track
- Mobility: Forklift Movable in Minutes
The Ultimate Agile Scale for Dynamic Field Logistics
Rather than investing hundreds of thousands in fixed concrete pits that anchor your investment to a single piece of land, our LPAX mobile weighbridge moves wherever your trucks move:
Leased & Short-Term Sites
Eliminate sunk capital costs on permanent civil work for properties you do not own.
Highway & Road Construction
Reposition the axle weigher continuously along new paving stretches, batching plants, and earthwork zones as the project advances.
Dispersed Loading Points
Ideal for expansive scrap yards, timber depots, farm harvest hubs, and multi-gate industrial yards where loading occurs across disparate locations.
Axle Overload Prevention
Instantly verify single, tandem, and tridem axle loads before commercial vehicles hit public highways, preventing safety violations and regulatory fines.
Engineering Architecture: Ultra-Low Profile & High Mobility
The engineering ingenuity of the Dynamic Works LPAX system lies in its balance of structural strength and maneuverability:
Dual 3.6-Meter Weighing Tracks
Two parallel 3.6m long tracks ensure wide-track vehicles, articulated haulers, and heavy trailers align cleanly, capturing the weight of each axle cluster smoothly as the truck rolls through.
Ultra-Low 65mm Profile
Standing just 65mm high, vehicle axles transition onto the tracks without steep inclines. This near-flush geometry prevents severe load-cell rocking, dramatically reducing dynamic shock and enhancing measurement accuracy.
Forklift Movable (1.25 Tonnes per Track)
Weighing only ~1.25 tonnes per track section, each module features built-in lifting slots for effortless relocation using a standard 3-ton yard forklift or backhoe.
Versatile Ground Deployment
Can be placed directly on an existing level concrete hardstand, asphalt apron, or well-compacted, leveled gravel bed. For an ultra-smooth road transition, simply seat it within a shallow 65mm recess.
Technical Specifications: 30-Tonne LPAX Series
Verified technical parameters of the Dynamic Works EXELON™ Low Profile Axle Weigher:
| Specification Parameter | Technical Detail |
|---|---|
| Gross Axle Capacity | 30 Tonnes per axle group (Tandem / Tridem capable) |
| Track Dimensions (L x W) | Dual tracks: 3.6m Length x Standard Width per side |
| Profile Height | Ultra-low 65 mm ground elevation |
| Tare Weight | Approximately 1.25 Tonnes per wheel track module |
| Handling & Mobility | Integrated forklift lifting points; relocatable within minutes |
| Foundation Requirement | Minimal / Foundationless (Rigid concrete pad or compacted surface) |
| Sensor Architecture | Hermetically sealed, high-precision IP68 stainless steel load cells |
| Load Cell Protection | Integrated over-voltage, lightning, and directional shock suppression |
| Weighing Mode | Static axle-by-axle weighing or low-speed dynamic weigh-in-motion (WIM) |
| Digital Instrumentation | Microprocessor terminal with auto-totalizing, ticket printing, & bright LED display |
| Manufacturing Standards | Built to ISO 9001:2015, CE, OIML & NTEP compliance |
Why Choose Dynamic Works Mobile LPAX Over Conventional Scales?
Direct operational comparison between the LPAX Mobile Axle Weigher and permanent platform weighbridges:
| Operational Comparison | Dynamic Works LPAX Axle Weigher | Traditional Full-Length Platform Scale |
|---|---|---|
| Civil Foundation Work | Virtually Zero (Flat hardstand or 65mm recess) | Deep pit excavation or 30m concrete slab + ramps |
| Installation Speed | Ready in 2–4 hours | 2 to 4 weeks (civil curing + assembly) |
| Relocation Equipment | Standard Yard Forklift or small loader | Multi-axle crane, low-bed trailer, and rigging crew |
| Yard Space Footprint | Extremely compact (fits narrow haul lanes) | Requires 20m–30m dedicated linear corridor |
| Capital Investment | Fraction of the cost of full-deck weighbridges | High mechanical, freight, and civil investment |
Rugged Electronics & Totalizer Software
Dynamic Works pairs every mobile axle scale with an industrial weight terminal engineered for dusty, demanding field conditions:
Automatic Axle Accumulation
The digital indicator automatically registers each axle pass and calculates the gross cumulative vehicle weight, generating instant printouts with axle breakdowns.
Waterproof IP68 Ingress Protection
Submersible-grade load cell potting ensures zero signal drift during monsoons, washdowns, or mud buildup.
Independent Power Operation
Includes heavy-duty internal rechargeable battery backup and optional 12V/24V vehicle battery adapters for remote operations off the power grid.
1-Year Unconditional Replacement Guarantee
Backed by our signature Dynamic Works warranty covering all primary structural and electronic components.
Deploy Instant Axle Weighing at Your Project Site
Eliminate downtime and streamline fleet logistics with mobile truck scales that travel wherever duty calls.
Direct-from-Manufacturer Pricing (Engineered at our ISO-certified Patna plant). | Rapid Nationwide Dispatch & Support: Dedicated engineering service hubs based in Patna, Bihar, and across India.