Static Axle Weighers: In-Ground Precision Axle Group Scales
Built to Order. Engineered to Last.
Axle overloading leads to severe regulatory penalties, uneven tire and chassis wear, brake fatigue, and critical safety hazards on the road. When your logistics operation needs accurate axle group verification without the substantial land footprint and expense of an 18-to-24-meter weighbridge, Dynamic Works delivers the Static In-Ground Axle Weigher under the trusted "EXELON" brand.
Engineered with a compact 4m x 3m deck, our static axle scales mount flush with the ground in a shallow pit. This setup offers comprehensive axle-by-axle monitoring, safeguards against axle overload, and accurately calculates total gross vehicle mass (GVM) for moderate-throughput transport hubs.
Axle Scale Highlights
- Deck Dimensions: Compact 4.0m x 3.0m
- Axle Capacity: 30 to 40T (Up to 50T Upgrade)
- Installation: Shallow In-Ground Flush Pit
- Civil Prep: Minimal Excavation Depth
- Compliance: ISO, CE, OIML & NTEP
Prevent Overload Violations & Balance Your Cargo
Uneven cargo loading can breach legal axle weight limits even when the truck's total gross weight is well within legal compliance. The Dynamic Works static axle weigher solves this problem:
Eliminate Axle Overload Fines
Accurately measure steering, drive, tandem, and tridem axle groups to ensure every section complies with regional road transport weight limits.
Compact Footprint & Shallow Foundation
Because the platform measures just 4m in length, excavation depth and civil foundation requirements are a fraction of those needed for full-length truck scales.
Safe, Flush-to-Road Design
The platform sits completely flush with the roadway, avoiding steep approach angles and providing an unobstructed path across your yard.
Optimized for Moderate Throughput Facilities
The ideal, cost-effective weighing setup for distribution centers, manufacturing warehouses, grain elevators, and commercial logistics yards handling steady freight traffic.
How Static Axle Weighing Works
Static axle scales achieve high accuracy by isolating and capturing each axle group while the vehicle remains stationary:
Sequential Axle Positioning
The truck drives onto the flush 4m platform, bringing the first axle group (e.g., steer axle) to a complete stop on the deck.
Instant Weight Capture
The micro-controller terminal captures and logs the stabilized axle reading within seconds.
Progressive Roll-Through
The driver pulls forward, positioning each subsequent axle cluster onto the platform. For example, a multi-trailer or B-double typically pauses across four designated axle positions.
Automated Gross Totalization
The digital indicator tallies the individual axle weights, printing an itemized slip showing each axle group alongside the cumulative gross vehicle weight.
Site & Approach Engineering: The Key to Precision
To achieve certified measurement accuracy on any static axle weighing system, the vehicle's chassis and suspension must remain on a uniform horizontal plane throughout the process. Weight transfer caused by body pitch or tilted axles will degrade reading fidelity.
Dead-Level Entry & Exit Runways
The vehicle must remain completely level while each axle is measured. Dynamic Works specifies that the concrete approach and departure aprons remain flat within 0.25 degrees of level across the entire length of the longest vehicle serviced.
Suspension Settling
Level approaches prevent artificial weight transfer between air-bag or mechanical leaf-spring tandem suspensions, ensuring the scale registers purely downward gravitational load.
Pre-Engineered Civil Drawings
Dynamic Works supplies precise site civil layouts and gradient guides to ensure your local contractor pours the approach slabs to the exact required tolerances.
Technical Specifications: Dynamic Works Axle Weigher
Verified engineering parameters across standard and severe-duty models:
| Engineering Parameter | Standard Specification | Severe-Duty Upgrade |
|---|---|---|
| Deck Dimensions (L x W) | 4.0 Meters x 3.0 Meters | Custom lengths (e.g., 4.5m / 5.0m for specialized spreads) |
| Axle Weighing Capacity | Up to 30–40 Tonnes per axle group | Up to 50 Tonnes heavy industrial rating |
| Installation Format | Shallow In-Ground Pit (Flush with surface) | Semi-recessed shallow trench |
| Deck Construction | Fully welded structural steel with anti-skid chequered plate | Heavy-duty H-beam sandwich core with industrial epoxy finish |
| Load Cell Technology | Hermetically sealed, IP68 double-ended shear beam cells | Digital compression load cells with surge/lightning protection |
| Operating Temperature | Certified performance from -35°C to +65°C | High-heat foundry/furnace site adaptation |
| Display & Terminal | Microprocessor terminal with bright high-visibility LED | Touchscreen terminal with ticket printer & automated boom barriers |
| Quality & Metrology Standards | ISO 9001:2015, CE, OIML & NTEP compliance | Weights & Measures legal-for-trade stamping |
Static Axle Weigher vs. Full-Length Weighbridge
Direct evaluation to assist operations in choosing between an axle weigher and a full-length truck platform:
| Operational Factor | Dynamic Works Static Axle Weigher | Full-Length Platform Weighbridge (18m–24m) |
|---|---|---|
| Total Scale Length | 4.0 Meters | 18.0 to 24.0 Meters |
| Civil Excavation Footprint | Minimal (Single shallow pit) | Large (Requires 20m+ concrete foundation) |
| Axle-by-Axle Compliance | Instant itemized printout per axle cluster | Only captures total gross weight (Unless multi-deck) |
| Capital & Equipment Cost | Low (Fraction of full-scale platform cost) | High (Substantial steel and freight expenditure) |
| Weighing Process | Multi-stop roll-through (15–30 seconds) | Single-stop instant gross weight (5–10 seconds) |
| Yard Space Requirement | Compact (Easily fits within access driveways) | Requires long, dedicated straight access corridor |
Protect Your Fleet with In-Ground Axle Weighing
Ensure full axle weight compliance and eliminate costly transport fines before vehicles leave your facility. Dynamic Works manufactures, installs, and supports rugged static axle scales across India.
Factory Direct Pricing with 1-Year Unconditional Piece-to-Piece Replacement Guarantee. | Precision Manufacturing: Patna, Gujarat. | Pan-India Field Support: Installation, calibration, and 24x7 service technicians based in Patna, Bihar, and key transport centers.